Thursday, January 30, 2014

New emblems came in today!!!!!!!!!!!!!!!

I cannot wait to add them... if the weather would cooperate for our exterior paint!!

Saturday, January 25, 2014

Trailer Tongue/Wiring

We painted the trailer tongue today and started on the wiring...   it was too cold to paint the exterior...so we worked inside.












One of the temporary plugs.. we have electricity!!!!!!!!!  :)







Sunday, January 19, 2014

Primer Time

First coat of primer today... WOOT!!!!  Already looking better!!

A few dings...  but it is from 1972??



Saturday, January 18, 2014

Prep...Prep... and More Prep...

I had already sanded most of the trailer during the week. I also did a little bondo work (with the help of my dad)... trying to cover up a few holes and dents. Today we were able to finish and prep for primer and paint!!


Sanding

Bondo




Removed all trim

Removed all windows


Caulk much???


Removing Putty Tape... (a PAIN)



All ready for primer!!!!!!!!!!

Sunday, January 12, 2014

Roof Coating

We coated the roof with waterproof sealant... It is a little lumpy in places but it is THICK.. and no one should be looking on the roof...LOL






Saturday, January 11, 2014

Progress... left and right :)

Today we accomplished SO much!!!  Started coating roof (water-proofing, will post when finished) we finished all the exterior wood replacement.. and insulated the inside :)
Moving a lot faster than I thought we would!!!





AND INSULATION...  SO EXCITED!!!!!




Added a few 2x4's for support!!!

Tuesday, January 7, 2014

New wood !!!

Rebuilt the back of the trailer which is the storage area in back of trailer.  







Wednesday, January 1, 2014

Rebuild.. one board at a time.......

Today we started to repair some of the rotten wood on the trailer (I really didn't think we would start this soon.)  It actually wasn't as bad as we figured it would be.  One side is finished (the wood section, still a lot of overall work) 3 more to go :)




Pretty banged up on the corners







New wood!!! 



Cut to fit for tin

Getting there!